Cloud Lab-54: vCloud Director Organizations- “Static Routing between two vApps in different Organization Routed Network” (Part 2)

This is part 2 of my post regarding Static routing between two vApps in the different organization. lets see what we will cover in “part 2” .

LAB-54 TASKS (Part 2)

In this Lab, we will perform following tasks

  1. Architecture diagram of Static Routing Between two vApps in different Organization Routed Network
  2. Add Static Route to Allow Communication (From HITech-> SkyNet)
    1. Add Route for “Skynet vApp Network to Skynet Org External Network” 
    2. Add Route for “HITech Org Network to HITech Org External Network” 
    3. Add Route for “vApp8” Network
  3. Test the vApps communication after Static Routing
  4. Add Static Route to Allow Communication (From SkyNet-> HITech)
    1. Add Route for “HITeh vApp Network to HITech Org External Network”
    2. Add Route for “SkyNet Org Network to SkyNet Org External Network”
    3. Add Route for “vApp9″ Network 
  5. Test the vApps communication after Static Routing

1-Architecture diagram of Static Routing Between two vApps in different Organization Routed Network

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg01

For sake of domestication. i will allow the communication between two vApps  which are in different organization. the first vApp is with name “vApp9” which is on “HITech Organization” and other one is “vApp8” which is on “SkyNet Organization” respectivelythese are already deployed in both organization as you can see them in my static routing Architecture diagram.

2-Add Static Route to Allow Communication (From HITech-> SkyNet)

1-Add Route for “Skynet vApp Network to Skynet Org External Network” 

Navigate to Organization “HITech”-> Administration-> Virtual Datacenters -> HITech-Prod-OrgVDC-> Org VDC Networks.

Right Click on Network “HITech-Prod-OrgRouted” ->Choose “Configure Services”.

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg15

Go to “Static Routing” tab-> Click “Add”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg17

Add Route for “From Skynet vApp to Skynet Org External” Network communication.  “In Applied on” dropdown, choose External Network “External Public”, Enter Name “From SkyNet vApp Net -> SkyNet Org External Net” and add route “192.168.16.0/24” (vApp8 Network) via “10.0.150.202” (External IP of Org VSE) -> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg18

Verify your added routes, it should look like as shown below. Make sure “Enable static Routing” Check box is checked-> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg19

2-Add Route for “HITech Org Network to HITech Org External Network”

Navigate to Organization “SkyNet”-> Administration-> Virtual Datacenters -> SkyNet-Dev-OrgVDC-> Org VDC Networks.
Right Click on Network “SkyNet-Dev-OrgRouted” ->Choose “Configure Services”.

cloudlab52-vCloudOrganization-Staticroutingbatweensameorg16

Go to “Static Routing” tab-> Click “Add”

cloudlab52-vCloudOrganization-Staticroutingbatweensameorg21

Add Route for “HITech Org Network to HITech Org External network” Communication. “In Applied on” dropdown, choose Network “External-Public”, enter Name “From HITech Org Net -> HITech Org External Net” and add route “192.168.63.0/24” (HITech-Prod-OrgRouted Network) via “10.0.150.203” (HITech-Prod-Edge External IP) -> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg20

3-Add Route for “vApp8” Network.

it will allow traffic for vApp8.  In static routing dialog box,  “In Applied on” drop down, choose Organization Network “SkyNet-Dev-OrgRouted”, Enter a descriptive Name “For vApp8” and add route “192.168.16.0/24” Network via “192.168.42.4″ -> Click “OK”

cloudlab52-vCloudOrganization-Staticroutingbatweensameorg22

Verify your added routes, it should look like as shown below. Make sure “Enable static Routing” Check box is checked-> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg22

3-Test the vApps communication after Static Routing

Go to “vApp9-VM1” and open the console and provide the login credentials. once login, because, its linux machine. use “ipconfig”  to check its IP address which is “192.168.21.100”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg23

If you ping the “vApp8-Web1” VM IP “192.168.16.100”. now we get the reply as shown below.

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg24

Similarly trace the network path of “vApp8-web1” VM. Run tracert 192.168.16.100 on command prompt.

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg25

As you have noticed, we have successfully reached to “192.168.16.100” from our “192.168.21.100” VM. Traffic will pass from “192.168.21.1 (vApp9-VSE Internal IP) -> 192.168.63.1 (HITech-Prod-Edge Internal IP) -> 10.0.150.202 (SkyNet-Dev-Edge) -> 192.168.42.4 (vApp8-VSE External IP) -> 192.168.16.100 (vApp8-VM1 IP)”.

4-Add Static Route to Allow Communication (From SkyNet-> HITech)

1-Add Route for “HITeh vApp Network to HITech Org External Network” 

Navigate to Organization “SkyNet”-> Administration-> Virtual Datacenters -> SkyNet-Dev-OrgVDC-> Org VDC Networks.

Right Click on Network “SkyNet-Dev-OrgRouted” ->Choose “Configure Services”.

cloudlab52-vCloudOrganization-Staticroutingbatweensameorg16

Go to “Static Routing” tab-> Click “Add”

cloudlab52-vCloudOrganization-Staticroutingbatweensameorg21

Add Route for “External Network”. “In Applied on” dropdown, choose External Network “External-Public”, enter Name “From HITeh vApp Net-> External Net” and add route “192.168.21.0/24” (vApp9 Network IP Range) via “10.0.150.203” (HITech-Prod-Edge External IP) -> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg26

Verify your added routes, it should look like as shown below. Make sure “Enable static Routing” Check box is checked-> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg27

2-Add Route for “SkyNet Org Network to SkyNet Org External Network”

Navigate to Organization “HITech”-> Administration-> Virtual Datacenters -> HITech-Prod-OrgVDC-> Org VDC Networks.

Right Click on Network “HITech-Prod-OrgRouted” ->Choose “Configure Services”.

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg15

Go to “Static Routing” tab-> Click “Add”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg17

Add Route for “From SkyNet Org Network to SkyNet External Network” Communication. “In applied on” dropdown, choose External Network “External Public”, enter Name “From SkyNet Org Net -> SkyNet External Net” and add route “192.168.42.0/24” (Skynet-Dev-Org-Routed Network) via “10.0.150.202” (External IP of Skynet Org VSE) -> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg28

3-Add Route for “vApp9” Network.

it will allow traffic for vApp9.  In static routing dialog box,  “In Applied on” drop down, choose Organization Network “HITech-Prod-OrgRouted”, Enter a descriptive Name “For vApp9 (internal)” and add route “192.168.21.0/24” (vApp9 Network) via “192.168.63.4″  (External IP of vApp9 Network)-> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg29

Verify your added routes, it should look like as shown below. Make sure “Enable static Routing” Check box is checked-> Click “OK”

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg30

5-Test the vApps communication after Static Routing

Go to “vApp8-VM1” and open the console and provide the login credentials. once login, because, its linux machine. use “ipconfig”  to check its IP address which is “192.168.16.100”

cloudlab52-vCloudOrganization-Staticroutingbatweensameorg18

If you ping the “vApp9-Web1” VM IP “192.168.21.100”. now we get the reply as shown below.

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg31

Similarly trace the network path of “vApp9-web1” VM. Run tracert 192.168.21.100 on command prompt.

cloudlab54-vCloudOrganization-Staticroutingbatweendifforg32

As you have noticed, we have successfully reached to “192.168.21.100” from our “192.168.16.100” VM. Traffic will pass from “192.168.16.1 (vApp8-VSE Internal IP) -> 192.168.42.1 (SkyNet-Dev-Edge Internal IP) -> 10.0.150.203 (HITech-Prod-Edge) -> 192.168.63.2 (vApp9-VSE External IP) -> 192.168.21.100 (vApp9-VM1 IP)”.

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s